H-800C

Dimensions

96 x 96 x 45 (inches) Round Shape
244 x 244 x 114 (cm)
Seats 8 people ( depending on local health codes)

Mechanical Equipment

Standard Single phase mechanical equipment package featuring ½ hp circulation pump with strainer basket, 2 hp jet pump with strainer, 12 kw electric heater, 100 sq. ft. cartridge filter, brominator/chlorinator, 2 inline thermometers, flow meter, wall mounted jet pump control timer. Pre-plumbed shell with 8 large jets, 8 medium jets, full sized N.S.F. listed skimmer, water level controller

All Spas sold into the United States of America are compliant with the Virginia Graeme Baker Pool & Spa Safety Act

Options

• 3 phase mechanical equipment package, 208, 220, 460 & 575 Volt
• Floating cover
• Locking insulating hardcover
• 24” sand filter substitution (c/w sand)
• 33” stainless steel deck mounted handrail c/w anchors
• 36” handrail substitution
• AV Alarm
• Emergency pump stop switch
• safety sign.

The Advantages of Acrylic vs. ConcreteAcrylic

Shouldn’t your project have the same advantage?

10 Reasons to Specify a

Pre-Plumbed Commercial Acrylic Hot Tub or Swim Spa By Hydropool.

1. Less Expensive - HydroTher commercial acrylic hot tubs and swim spas by Hydropool are pre-plumbed and considerably less expense to install than concrete versions.
2. No Water Proofing - HydroTher commercial acrylic hot tubs and swim spas by Hydropool do not require the additional expense of waterproofing the shell to prevent leakage.
3. Ease of Installation - HydroTher commercial acrylic hot tubs and swim spas by Hydropool require only minor on-site labor to install.
4. Less Weight - HydroTher commercial acrylic hot tubs and swim spas by Hydropool weigh considerably less than concrete models allowing for rooftop and balcony installations.
5. More Selection - HydroTher commercial acrylic hot tubs and swim spas by Hydropool are available in many different shapes and colors to suit any design or budget.
6. Ease of Maintenance A smooth acrylic surface with no grout lines or marcite makes HydroTher commercial acrylic hot tubs and swim spas by Hydropool easier to maintain.
7. Reduced Operating Costs - HydroTher commercial acrylic hot tubs and swim spas by Hydropool require less chemicals and their “closed cell” insulated design substantially reduces the cost of heating.
8. Shell Flexibility - A thick flexible shell eliminates concerns over shell movement or cracking during draining or refills.
9. Ease of Repair - With HydroTher commercial acrylic hot tub or swim spas by Hydropool, the plumbing is run outside of the shell rather than inside the walls with makes repairs easier.
10. IAPMO Approved - HydroTher commercial acrylic hot tub or swim spas by Hydropool are approved by the International Association of Plumbing and Mechanical Officials and most Departments of Health nationwide.

• Consult your local Health or Building Departments to ensure that Hydropool meets your local commercial hot tub standards including approved colors.
• Dealers may substitute their preferred brand of pumps, filters, chemical controllers and accessories.
• All spas must be adequately supported. Decking surround and electrical requirements should be specified by the project’s architect or mechanical consultant. Any adjacent metallic components must be grounded.
• Nearby showers and washrooms are highly recommended and mandatory for some health departments
• Access to the plumbing for routine service or repairs should be incorporated into the deck design.
• Tiling on decking around spa must be available for overflow or splash out and be slip resistant.
• Motor starters, magnetic contactors, heater disconnect, and ground fault protectors are not included in the equipment packages shown.
• Jet pump timer button should be located such that users must exit the tub to reset the timer.
• The installing contractor is responsible for supplying all plumbing from the mechanical equipment to the hot tub.
• The use of 45&Mac251; and 90&Mac251; elbows should be minimized as they restrict the flow.
• The hot tub should be operated for 24 hours before it is enclosed with decking to ensure that the plumbing has not been damaged during installation.
• Consideration should be given to rendering the hot tub inaccessible when unsupervised.
• For further installation or code requirements we recommend consulting your local building department reference N.S.P.I standards for public spas.